Ikan Gimbal Review 2022: Best Choice For You

Ikan EC1 Gimbal Review: 2022: Best Choice For You
  • HanJin

The Ikan EC1 gimbal stabilizer is a camera stabilizer that provides smooth footage for your video while shooting. It is the perfect choice if you are looking for something lightweight and mobile. In this blog, we will take a look at the features of this gimbal and whether it is a good option for your needs.

Ikan Gimbal Review

  • All-Aluminum Construction for Durability
  • 360 Degree Movement from All Axis: Pitch, Yaw & Rolle
  • Uses DSLR and Mirrorless Cameras from 2.0 to 4.5 lbs
  • Three-Axis Gyro Stabilized Brushless Motors are included to balance most mirrorless and DSLR cameras
  • OLED Display Screen to display operating modes
  • Equip with a 32-Bit Controller and 12-Bit Encoder
  • Lithium Battery-Low Maintenance, Eco-Friendly
  • The on-off status is indicated by an illuminated joystick
  • 3/8”-16 Tripod Mount Socket

Pros

  • Advanced stabilization
  • Battery life up to 8-10 hours
  • Unique and compact design
  • You can control the tilt, pan, and roll of your camera with the built-in app

Cons

  • It doesn’t provide up and down motions very well

What’s in the Box?

Ikan EC1 gimbal- What's in the Box

For better protection, the gimbal (same model as Beholder DS1) is supplied with a small and portable case that has a foam layer inside. The carry case contains:

  • Battery Cap with 3/8-16 Mount (Pre-Assembled).
  • Pre-assembled Battery Holder
  • Instruction Manual
  • Micro USB AC Adapter
  • Pre-Assembled Quick Release Plate
  • Travel Case
  • 18650 Batteries

Design

Ikan Gimbal Review- Design

The Beholder EC1’s entire body is made of aluminum, making it light and durable. It can also take up to 4.5 lbs. of lenses.

A smart OLED display is also included in the design. It can be found on the handle and shows power, operation mode, battery life, and battery life.

Beholder EC1 gimbal stabilizer also comes with a quick-release plate. This makes it easy to balance your camera and eliminates any tools you may need with other gimbal stabilizers in order to mount your camera.

The battery cap is located at the bottom of your handle. It has a 3/8th mounting that allows you to attach your BeHolder EC1 tripod, jib, or double-hand support.

There are also two 1/4th mounts on either side of your handle, where you can attach accessories such as a microphone or light.

You can choose from single or dual grip versions (the EC1-DGHKIT is the dual grip version).

If you plan to use the gimbal with large DSLRs like the Nikon D750 or Canon 5D, the dual grip version is the best option.

Ikan sells the dual grip separately as well. However, it’s not clear if it is compatible with EC1 or DS1 Beholder Gimbals.

Stabilization Technology

Stabilization Technology

If you think the design features sound cool, you can wait to see what the Beholder EC1 is capable of and how it can help you make your videos look professional and high-quality.

Beholder EC1 gimbal stabilizer allows 360 degrees rotation in all axes. This is thanks to three 360-degree rotating brushless motors.

Technology that ensures the EC1-3-Axis Gimbal Stabilizer offers a 0.01 error angle is due to the combination of a 32-bit controller with the 12-bit encoder that is included in the gimbal stabilizer.

They collect data about the motor’s exact location and use a control strategy with an adaptive stabilization algorithm for smooth and flawless video, no matter whether you are running, walking, or riding a bicycle.

There are several modes that the Beholder EC1 can be used in, including follow, lock, headlock follow roll, and returning to your starting position.

An auto inversion can be used in conjunction with any of the following or lock modes.

Battery Life and Compatibility

Ikan Gimbal Reviews- Battery Life and Compatibility

This is all supported by a Li-Po lithium battery that can provide up to 20 hours of continuous operation.

Although it isn’t the best, this product is very close to the top.

The BeHolder EC1 also has the unique ability to use a wide variety of cameras.

It can be used with DSLR and Mirrorless cameras. The list is too long, but it will fit the most popular cameras, such as the Sony a6300 and Sony a7SII, Panasonic GH4, and Canon 5D Mark III.

Setup

A great setup for any type of gimbal depends on the type of camera and lens that you use at the time. Let’s assume that you have the EC1 gimbal and the Nikon D7500 camera. Attach the release plate. It has a smaller slot that can be tightened.
It can cause problems for some because not all cameras fit into this space. EC1 gimbal comes with a small screwdriver, which can make it easier to set up your camera.
To mount or remove the quick plate, press the pin that seems long enough for your fingers to reach it. It is possible to remove the plate by using a little force, but it will not take much.
The gimbal’s ability to quickly and easily rearrange is one of its best features. The EC1 gimbal can be used to create low angles with your camera.
It is also great that the EC! holder 3-axis gimbal feature a screen. This allows you to see the mode in which you are using it, as well as information about its battery life. There are three mounting points: one on the bottom and two on each side.

How to Use Beholder EC1

For experienced filmmakers, balancing the EC1 should only take around one hour. Beginners may have a difficult time stabilizing all three axes. The result is amazing.

The Beholder EC1’s advanced stabilization technology, which uses a 32-bit controller and a 12-bit encoder to produce amazing handheld stabilization, is a great example of this. This 3-axis gimbal also has three 360-degree rotating brushless motors, which provide a wide range of motion.

You can also choose from five profiles or modes. These modes can all be selected by pressing the button at the handle of the stabilizer.

Three follow modes: In Yaw Axis follow mode, the EC1 follows only your Pan movements. The EC1 only follows your Pan and Tilt movements in Pitch and Yaw–Axis follow modes. You have full control over the last 3-axis following mode, which allows you to Pan Tilt and Roll.

Auto-Inversion mode. In this mode, the camera is inverted. Simply flip the handle to change to Inverted Mode. This mode can be used in conjunction with any Lock or Follow Modes.

Lock mode: The Yaw and Pitch axis work together in lock mode to ensure that the camera is pointed in one direction.

Ikan EC1 Beholder Alternatives

Gimbals are very popular, as we have already mentioned. There are many options available to choose from, depending on your needs and the intentions of your filmmaker.
Beholder DS1 Handheld Stabilizer – This 3 axis stabilizer, with fast response and external remote control, supports any angle boot, has dual sensors, and offers incredible stability and accuracy. The DS1 is a great model for video editors who want professional-looking videos.
DJI-M 3-Axis Gimbal stabilizer – This excellent stabilization system allows for unassisted handheld shooting, but with minimal hand-shakes. It can be used with most cameras and configurations that weigh up to 8 pounds (4kg). Ronin-M uses brushless motors with three axes. One for side-to-side roll – keeping your horizon level – one for tilt and one to control the pan.
Zhiyun Crane V2 – Primarily designed for mirrorless cameras and DSLRs that are usually lightweight, Zhiyun Crane V2 offers a relatively affordable way to take the next step in creating professional-looking, cinematic videos.

Conclusion

If you have a small camera, a shorter lens, or if you are just starting out in videography, the Ikan EC1 3-axis gimbal will work well. This gimbal is easy to use and balance if you have the right lens and camera. Mirrorless cameras with a smaller lens are ideal for use. Journalists, documentarians, commercial or event videographers will love the EC1 gimbal. The EC1 is ideal for small cameras.

We hope this article will be helpful for you. If you are interested in more information, please visit our website Luicdcam to learn more and don’t forget to support us. Thank you for reading!

Leave a Reply

Your email address will not be published.