Drone battery chargers are an essential part of owning a drone. If your drone’s battery is low or dead, you can charge it with a good charger.
But how do you know which one to buy? Lucidcam has compiled a list of the top best drone battery chargers for you to choose from! Please read below for more information about each model and its features.
Top-rated Best Drone Battery Charger
- HOBBYMAE D6 Duo Pro Charger...
- Auto detecting lipo cells;...
- Internal independent lithium...
- All-in-one protection, inc....
- Modes: Balance Charge, Fast...
- Powerful AC/DC multi-charger...
- Charges 1-6 C (Li-Po, LiHV,...
- Integrated voice functionality
- Dynamite Dashboard-Smart phone...
1. Hobbymate D6 Dual Port
The Hobbymate D6 duo is another dual-port charger from a much lesser-known brand, Comes in 2 types- AC/DC version and a DC-only version which will need an external power supply, cost-wise it makes sense to buy the AC/DC version.
Below is a review of the original D6 Duo. It’s located in the “AC/DC” section. It has been my favorite charger since its inception. I currently have three of them.
The only thing that I did not like about the D6 Duo was its AC power supply. It’s fine to plug it in the wall but I already have a huge 1200 watt DC power supply. I was a bit disappointed with the AC input from the D6 Duo.
- HOBBYMAE D6 Duo Pro Charger...
- Auto detecting lipo cells;...
- Internal independent lithium...
- All-in-one protection, inc....
- Modes: Balance Charge, Fast...
Hobbymate was listening. The D6 Duo’s AC input capability is removed and this version cuts $50 off the cost. This is a clear winner for me. The AC/DC Duo is the charger that plugs into the wall. This is the DC-only version if you plan to use an external DC power supply.
The D6 Duo has two channels so you can charge a variety of different packs at the same time, without the risk and complication of parallel charging. The output power is still high enough that it can charge a parallel board full of typical FPV batteries in about an hour or less.
2. HOTA D6 Pro 650W Dual-Output AC/DC
One of the best Lipo chargers
The HOTA D6 PRO Dual AC/DC charger can be used as a primary charger and is very balanced for use on the bench. This battery charger is up to 20A charging rate (ideal for very big batteries (10Ah+)
Dual output channels allow you to charge two types of batteries simultaneously. You can charge up to 12 batteries simultaneously if you have parallel boards (6 outputs).
The AC power supply is built-in so that you don’t need to buy an external power supply immediately. It only provides 100W per channel. If you wish to make it work at its full potential, you can connect stronger external power supplies (650W and higher) via the DC input. It is almost like a higher-powered version of the iSDT608AC. The 800W and 1000W Server PSUs are available for as low as $30 on eBay.
3. SkyRC D100
Best value Lipo battery charger
The device has an integrated power supply. Plug it into an outlet.
This product can charge more than 7 batteries (Li Po and LiHV, NiFe, NiMH, NiCd) from 1-6 Cells.
It can charge two batteries simultaneously (using separate 100W charging circuits).
It uses the same expansion sensors such as a battery temperature sensor, PC link and WiFi Module for additional functionality and safety.
Has the option of DC power input so you can use a car battery with this charger if you want (will need to make your own cable though)
The D100 is our excellent charger, and it is also not very expensive. You get a trim, precise, and easy-to-use battery charger for your money. You can charge almost any battery simultaneously with 200W, which is ideal for most drone pilots.
If you’re into micro-interior quadcopters or fixed-wing aircraft, the ability to bill 1ST batteries is a great feature. The best part about the S60 battery charger is that it doesn’t require a separate power supply. Plug it into a wall socket.
4. SkyRc E430
Best Budget Charger
The E430 balance charger is the best budget charger. There are cheaper options, but they are not as powerful (30W) and as precise as this one. It also keeps the cell voltage at +-.01V. For such a low price, the E430 charger offers a lot of functionality. It can charge 2S,3S, and 4S Lipos. This is a great feature as most people only use 2S and 3S lipos.
- SKYRC e430 charger is...
- SKYRC e430 ,100-240V AC...
You can also charge a LiFe battery, which is becoming more popular as the energy density becomes closer to LiPo’s. You can also adjust the charge rate from 1-3A. You can also set the charge rate between 1-3A if you’re in a hurry. The charger comes with a built-in power supply that can be used directly from a wall outlet, keeping the overall weight to a minimum.
5. Hitec RCD Power Peak D7 Charging Station
• Two independent 200-watt output ports
• Input voltage (AC/DC): 110–240V/11–30V
• Total maximum output: 400W
• Integrated Multiplex battery-identification system
The Power Peak D7 AC/DC Charging Station is the latest Hitec product. It is equipped with two 200-watt output ports that can provide up to 20 amps each.
- High-Performance 200 Watt...
- USB Charge Sockets for...
- Unique BID (Battery...
- Internal Resistance Meter
- Internal Temperature Display
The D7 is capable of quickly charging all types of battery chemicals. It also has mini USB sockets that allow you to monitor your battery health with the LogView Software. You can also keep current with software updates.
Compatible with all USB-powered smartphones, digital cameras, and other devices, the 5V/1A USB charger socket is compatible. Multiplex’s integrated bidding system provides safety and convenience for programming batteries using the optional BID keys or chips.
For easy reading and four languages, the display features two separate, backlit graphic screens.
6. iSDT D2 200W Two-Channel AC
The most effective LiPo battery chargers for drones
The ISDT D2 indoor charger is very popular for FPV. It comes with a built-in power supply and a dual-channel output of 200w each. You can charge your phones and cameras with the USB output, and it also has a gorgeous color LCD screen. It’s easy to use with its two buttons and scroll wheel. It lacks DC input and is heavier than the Idst Q8. This makes it less suitable for field charging.
- 【Add more function】D2 mark...
- 【Upgrade hardwre】D2 mark 2...
- 【Dual channel output】...
- 【Feature】 Wide range AC...
- 【Supported Batt. Type】LiHv...
This charger is also a multi-chemistry battery, it supports other battery chemistry like Lead Acid, Li-ion, NiMh, etc.
A two-channel charger allows you to charge multiple batteries simultaneously or manage two parallel boards at the same time. It is almost like having two separate chargers.
7. ElectriFly AC/DC Triton2 EQ
One of the best chargers for batteries
• Touch-pad controls for easy input
• Tilt-up LCD screen for easy viewing
• AC and DC power input
• Easy-to-navigate menu system
The Triton charger line from ElectriFly has been a staple in E-pilots workbenches, field equipment boxes, and their workbenches for a long time. It continues to be a reliable and rugged choice for many pilots.
- FEATURES: Charges 1-24 cell...
- INCLUDES: ElectriFly AC/DC...
- REQUIRES: Charge leads...
The Triton2 EQ can be used for charging all types of pilots, including indoor racers with smaller battery packs and hexacopter pilots with larger 6S LiPo batteries.
The menu system has two buttons and one dial button. It is easy to use but can take some time to get used to. The manual is well-written and includes a pull-out reference guide covering the setup, main menus, and menu windows.
The charger is easy to use and can charge most batteries, including Ni-Cd (NiMH), LiPo, Li-Ion, LiFe, and LiPo). It is easy to read the two-line LCD screen.
8. Venom Pro Quad
The Venom Pro Quad can charge four batteries simultaneously with its vertical layout and four charging circuits, each with 100W power. The Venom Quad four-port charger is a great solution for pilots who need to charge several packs quickly and easily.
You get four charging ports, which makes it incredibly compact. It takes up as little space as any single output charger. It comes with charging cables and two USB charging ports at the back so that you can charge your USB devices.
The Venom Pro Quad is designed to always provide a safe voltage so that you can balance charge your drone batteries again and again without worry. To avoid excessive wear and tear on your drone batteries, the charger prevents you from overcharging.
This charger is excellent for drone pilots that need to charge multiple packs quickly.
9. Holy Rock 5 In 1 Charger
The most powerful charger
To be able to generate use of this Holy Stone charger. It will be necessary to connect it to a USB power source. It can be any device that connects to your computer, from your wall to your laptop.
However, you will need to plug it into the wall to get the best price. It will have enough Amps to power all five batteries.
It would be easy to assume that something this valuable is expensive is true, but it isn’t. It is made from weak plastic, which makes it both economical and potentially dangerous to walk on.
The Holy Rock 5 in1 battery charger is expensive. Get it now while it’s still only $10
This is why it should be placed in the number 2 and not the number 1. This iMax battery charger can do more than just cost.
10. Drone Battery Charger – ISDT SC-608
It is also worth mentioning the IDST608 charger, which stands out as an excellent battery charger. The product’s layout is outstanding, with an exceptional 2.4-inch IPS display screen. This makes it stand out from its competitors.
It looks great in theory. It can charge some kinds of batteries like LiPo, LiHVV, and LiFe batteries from 1-6 Cells. This charger does everything you need. This is a better option than the Skyrc S60.
This charger is not a power supply, which is why I don’t recommend it to most people. This isn’t usually a problem, but the IDST608 is so powerful that you need a 150W power supply. It is costly.
- Colorful and bright UI design,...
- Quick & simple function menu...
- Supports online update with...
The main power supply is made by IDST (CP16027 Power Adapter), but this will cost you the charger, increasing the overall price.
This battery charger is easy to use thanks to its high-resolution screen and easy-to-use food selection.
- You can charge 1S-6S cells Lipo (to name a few variations like LiFe and LiHv).
- It does not include a power supply. Official ones are the same price as the battery charger.
- Extremely small battery charger.
- For billing on the move, a larger battery can be used to power it.
11. Tenergy TB6-B Balance Charger
The Tenergy T6-B battery charger can be used as an all-in-one charger. This is especially useful when you have multiple types of batteries. You can use it to charge NiMH, NiCD, Li-ion, and SLA batteries. You won’t need an extra battery charger if you purchase this set.
- One charger for many battery...
- Wide connector compatibility -...
- Works with multiple voltages -...
- Multiple functions - More than...
- Easy to read screen - View all...
It only charges one battery at once. Its best feature is its memory function. It can store pre-sets for LiPos. It is as simple as plugging in your battery and choosing your settings. Then, you can bill! This saves you time and allows you to fly more often.
The only drawback is that it charges one battery at a time.
12. ToolkitRC M8 DC 300W
One of the Best Lipo chargers
A standalone charger, wattmeter, and servo-checker can run well above $100. However, the toolkit is compact and affordable at $39.99. The M8 300W charger can charge DC voltages from 10-30V.
- ToolkitRC M8 300w 15A Battery...
- Can measure PWM / PPM / SBUS /...
- Can output PWM / PPM / xBUS...
- Discharger current: reccycle...
- Lixx Battery full voltage...
The M8 can charge batteries up to 6s voltages. It has a maximum charging current of 15A. You can adjust the charging current to charge the battery. Higher charging currents will result in shorter charging times and significantly lower battery life.
It can also charge any of the chemistries listed above. The charger can output parameters such as current consumption, voltage applied, power consumption, and wattage when in wattmeter mode. The charger outputs parameters such as the cell resistance or individual cell voltages in cell checker mode.
13. SKYRC iMAX B6AC V2 Twin Power
Cheap Lipo Battery Charger
SkyRC iMax quickly becomes the ‘go to’ drone battery charger, holding the top spot. How come? There are many reasons for this. It has a 6A high charge. The B6 is a single port charger that accepts 11-18DC input and charges LiPo batteries from 1-6s.
This means it can charge your LiPos very quickly. This will reduce the time it takes to charge your LiPos and allow you to fly more often.
- Latest Version iMAX B6AC V2...
- Sold by Autnorized US Dealer -...
- Dual Power AC/DC Input - Max....
- Charges Battery Type: LiPo,...
- Net Weight 632g - Size 144mm...
You can also charge other types of batteries, such as nickel-cadmium and nickel-metal hydride.
The SkyRC iMax is moderately priced and will save you money in the future. Because of its flexibility and long-lasting nature, it is durable. It is not necessary to purchase additional chargers for different types of batteries. It doesn’t end there.
The iMax can be used to measure the resistance of your batteries and test the voltage analysis from each cell. It also allows you to determine if your drone’s battery charger is dead.
14. 1S LiPo Charger for Tiny Whoops
A convenient charger for 1S batteries. This charger is compatible with all 1S LiPo. The charger also includes a Picoblade 1.25 connector.
You can charge typical LiPo (4.20V) or HV type (4.35V) using the slider. You can also choose between 0.2A and 0.6A charging currents by using the slider switch.
- LED lights indicate when each...
- 5 independent ports:Could...
- Note: Doesn't include...
- Charge at either 200mA or...
- Multiple power sources:...
This charger can charge up to 6 batteries at once using either an XT60 battery or a barrel connector power supply. It also can be powered with a different bigger battery (for charging batteries on the move ).
15. ISDT SC-620
The SC-620 has the same high-resolution display as its brother SC-608, but it also comes with a 500W charger that can charge up to 20A. This is a great display, but it’s not a good idea to charge your batteries fast. This reduces the cycle life of your battery (the number of times you can charge/discharge a Lipo while still maintaining its full output capacity).
Most batteries can only charge at 5C. It is best practice to charge your lipo at 1C, so having a 500W charger is not often needed unless you are using higher batteries like a 10,000mAh Lipo.
- More powerful power 500W,...
- 260,000-color screen, with a...
- scOs developed just for smart...
- ARM 32bit Hi-speed CPU
- Hi converting efficiency
It is easy to use the interface thanks to its high-resolution color display. And this charger can charge just about any battery from 1S to 6S so from a functionality point of view it is great.
I have a problem with the charger because it requires a 500W power supply. However, ISDT does not sell this power. To make matters worse, the charger uses an XT60 connector for power input. If you purchase a third-party charger/ power supply, you will have to solder a brand new connector. I believe there are better options.
Lipo Battery Charging Basics And Terminology
Before you dive into the guide, there are some terms that you should be familiar with.
mAh (spelled milli Amp hours) – This number denotes the battery capacity of the battery. This number is very similar to the battery capacity on our phones. A larger number indicates a greater capacity. Higher capacities are at the cost of heavier weight.
A quad with a larger battery capacity will weigh more. This can make it feel slower and less agile.
C-rating – The C ratings of a cell determine the safe amount of current it can deliver. The battery’s C rating determines how high the discharge current is. Manufacturers use the C rating as a marketing tool and make misleading claims about it.
Battery connector – This connector connects to the quad flight controller to provide power and to allow it to be connected to the battery. The voltage and the battery’s current carrying capacity will determine the type of connector that is used.
A smaller battery will typically use a JST connector or a JST PH2.0 connector, while larger batteries will use XT30 or XT60 connectors.
Parallel charging leads – A group of wires that allow a battery to charge is called parallel charging wires. To create a 3S battery, three 1S batteries can be connected in series. The individual 1S batteries can be charged independently by the balance charging wire.
Current Battery Charging – This is probably one of the most important calculations and factors to make before charging a battery.
A 1C charging rate is ideal. While 2C charging rates can be acceptable, anything higher could reduce the battery’s lifespan over the long term. One example is a 1500mAh 100C battery that can be charged safely at either 1C (1.5A), or 2C (3A). Advanced chargers can adjust the charging currents based on the battery.
Choosing A Battery
Before a battery can be eligible to use your drone, there are several criteria. The first is the size. When we discuss the size of a battery, it is more than just its physical size. It also includes its capacity.
Let’s now focus on size and weight. It is true that when we are striving for longer flight time for our drone, we usually go for the batteries with the highest capacity. However, you must also ensure that the battery is compatible with the drone and does not cause any problems during take-off. The weight of the battery determines the drone’s maximum take-off weight.
You must also ensure that the battery you choose fits into the drone easily. To ensure that the dimensions are correct, make sure to measure the drone’s battery compartment. To ensure that you have the correct battery for your drone, it is essential to carefully check the maximum weights of all drones to determine which one you should choose.
The Cell count
One of the most important things to consider is its battery count or battery voltage when choosing a battery. This is important because the voltage of your battery is directly proportional to the motors’ power. This is why you’ll find that batteries with a higher voltage or greater power output assist engines in providing more energy. These batteries are heavier than expected, however.
There is no way to choose suitable batteries for you in terms of their voltage output. You can compare the efficiency of your drone’s motor thrust tables to determine the correct voltage.
We can say with certainty that a battery with higher cell counts will provide greater voltage. However, the downside is the increased cost and weight.
The most important thing to consider when selecting the battery’s voltage for your drone is how many motors it has. It would help if you were sure that the drone’s electronics and the motor could handle the chosen voltage.
It is essential to know that drone motors can be very strict about voltage. Any changes could prove detrimental.
Parallel Charging Boards
Parallel charging boards have probably been mentioned at least a dozen times. What are parallel charging boards? What are parallel charging boards?
Since mini quad pilots use a lot of small batteries, parallel charging is a big help. These components allow you to charge multiple batteries at once from one charging port. Some chargers only have one charging port. Charging 10 batteries takes approximately an hour. Parallel charging boards are therefore available.
The parallel charging board splits the current from the charger and sends it to each port on the board. If a parallel charging board has 5 ports and 5 battery connections, the current from the charger will be divided among all 5 ports.
There is a catch. The charger considers all 5 batteries to be one larger battery and can only charge them together if they are of the same voltage and capacity. Batteries with different capacities can be connected together, but the smaller battery might get overcharged or get damaged.
Tips for how to use your battery charger properly
You can maximize the life and use of your battery chargers as well as the battery’s lifetime by knowing how to properly use them.
If your battery is not being shut off completely, don’t connect an unregulated “automatic charger” to it overnight.
Keep your battery safe in a cool, dry place.
Your battery life is reduced by one year for every 5degC that exceeds 35degC.
Calculate the battery’s total charge time correctly. You should take the battery’s amp-hour and divide it by-charger rating time (amps), then add around 10% for top-off charging.
Batteries are delicate components, are flammable and if mishandled can catch fire. Make sure you own A LiPo bag that will not burn or catch fire if something fails with your battery (such as overheating etc.).
FAQs about the best drone battery charger
How long should I charge my drone battery?
Drone battery endurance is a significant problem for the industry. Most commercial drones carrying a payload have a flight time of only about a half-hour – but it can take 60 – 90 minutes to charge the drone battery.
Do you need to charge a drone?
Unlike their big brothers in the military, consumer drones run on electric power that uses some form of a combustion engine (or solar). Your drone must have a reliable power source, and that means batteries. The problem with batteries is that they are heavy, must be charged, and are typically expensive.
Can you charge drone batteries?
It is always good to have at least two drone batteries with you. If you need more flying time, use a power bank to recharge. We are using an Anker 20100mAh power bank; you can charge your drone up to 4 times with this power bank. Each charging cycle will take approximately 1 hour.
When you’re looking for the best battery charger for your drone, it can be hard to know which one will work best. We hope our review of many different chargers helped make that decision more accessible by providing detailed information on each product and its features as well as pros and cons. Whether you’ve already bought a charger or are still in need of one, we think this article has something for everyone. Happy flying!
Related: How to store Lipo batteries
Last update on 2022-01-18 / Affiliate links / Images from Amazon Product Advertising API